Gelid Accessories
Gelid PWM Y Cable
Model: CA-PWM-01
SKU: 30333
Connect 2 GELID fans to your mainboard's CPU
socket.

Use the GELID PWM Y cables to connect a series of
up to 5 PWM fans and provide as much extra
cooling as desired.
Cable Length (mm): 350
Connector: 2x4 pin
Plug: 1x4 pin
PWM Y Cable
The PWM signal input from the mainboard is used
to control a series of connected PWM fans for
optimal performance in noise and cooling.


Features
Connect 2 PWM fans to your mainboard’s CPU
socket. Use multiple Y cables to connect a series of
up to 5 PWM fans and provide as much extra
cooling as desired.

Power drawn into your CPU cooler is adjusted
depending on its temperature. An idle CPU does not
generate as much heat, requires less active cooling,
and hence slower fan speeds will be sufficient.
Further this also reduces the overall ambient noise
of your PC and it's handled automatically with little
risk to your PC components.

While PWM fan controllers are very common in
today’s PC industry and available on most
mainboards, there is often only one or two such
PWM headers, reserved for the CPU and or the
chipset fans. One way this excellent noise reduction
idea can be extended to the numerous case fans
inside a typical PC is by utilizing a GELID PWM Y
Cable.

The long cable provide enough length to reach any
location in your case.
Copyright © 2012, Rexus Corp. All Rights Reserved.

To contact, please call (909) 598-5551
To e-mail, please write to sales@rexususa.com
CLICK HERE TO SEE ALL
GELID PRODUCTS
Loading
Loading