10/100/1000 Mbps Gigabit Ethenet Adapter
Specification FEATURES and BENEFITS

• Integrated Gigabit Ethernet PHY and MAC functions; Full/half-duplex and 10/100/1000 Mbps triple-speed operations support
• IEEE802.3ab Auto-Negotiation support
• Automatic detection and correction of cable pair polarity, along woth Auto MDI/MDIX cable crossover or pair swap detection
• IEEE 802.3x compliant flow control support for full-duplex operation;Collision-based back-pressure support for half-duplex
• IEEE 802.1p Priority Queuing support with 4 classes of priority queues
• IEEE 802.1Q virtual LAN(VLAN) support with 63 BLAN tags
• 64KB deep on-chip Rx and Tx packet buffer
• IPv4 TCP, IP and UDP checksum off-loading capability over Rx and Tx
• IPv4 TCP segmentation off-loading capability over Tx
• Jumbo frame support up to 16KB
• Adaptive interrupt
• Ring type packet-descriptor management circuit; Support multiple packet-descriptor fetching in a single burst
• Entering Power Saving mode by automatic link speed switching from 1000Mbps down to 10 or 100Mbps in standby
• Wake-up from Pre-ACPI and AbnormalShut-Down
• Hardware and sofrware counters support for traffic statistics gathering
• DMI 2.0(Destip Management Interface), WfM 2.0(Wirec fo management) compliant
• Advanced packet filtering
• Provide analysis tooling for 1000Base-T type ling over its link quality, cable diagnostics, cable loss, return loss and NEXT loss
• One built-in RJ-45 connector
• Two LED indicators: Link/Activity
• Driver supprot for: MS Widow server 2003/XP/NT/ME/2000/98SE, Read Hat Linux 7.3(kernel 2.4.18-3) or later, Novell Netware 4.2
/5.x/6.x/ODI 1.11



System Requirement  MS Windows 98SE/Me/2000/XP, Windows CE 3.0, Linux


Includes Gigabit Card
User's manual
Software driver  

Copyright 2012, Rexus Corp. All Rights Reserved.

To contact, please call (909) 598-5551
To e-mail, please write to